1751 VPN

[konn]

Hi,

I need to configure a Cisco 1751 ADSL/VPN router for a site to site VPN to a VPN 3000 concentrator located in overseas. I have the following question.

1. What information should I gether from the VPN 3000 concentrator.

2. Should I manually configure the Cisco 1751 or get the configuration done

on the VPN 3000 concentrator and upload to the Cisco 1751 router.

3. How can I get the 3DES and activate to the Cisco 1751 router.

I hope someone can advice. Thanks

[ajagadee]

Hi,

1. You need to gather info on Isakmp Policy, IPSec Policy, Pre-shared key and

networks that you want to encrypt. You can refer the below URL which explains

about setting up an IPSec Tunnel between VPN3000 and Router.

http://www.cisco.com/warp/customer/471/ALTIGAR.shtml

2. The Cisco 1751 and Cisco VPN3000 are two different platforms and that said, you need to configure the 1751 manually.

3. You need an IOS Image that supports 3DES and this can be downloaded from Cisco's Software Center provided you are authorised to do so.

Regards,

Arul