Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

2621 VPN P1 & P2 UP No traffic through tunnel nat?

Before I get too much flack ... Ya I know 2621? But that is what I have to work with.

I can bring up the far end which is a sonic wall fw. I am almost postive that it is a nat issue and the device does not know to push the interesting traffic through the tunnel ...

I have tried the following nat:

ip nat inside source list 125 interface Ethernet0/0 overload (e0/0 being the outside interface)

Entry 125:

access-list 125 permit ip 172.10.1.0 0.0.0.255(Inside)  172.20.1.0 0.0.0.255(remote inside)

AND:

access-list 130 deny   ip 172.10.1.0 0.0.0.255 208.91.230.0 0.0.0.255

access-list 130 permit ip 172.10.1.0 0.0.0.255 any

!

route-map nonat permit 10

match ip address 130

Thanks!!!!

When I perform a traceroute I get the next hop into my isp

Phase 2 stats:

All send errors

1 REPLY
New Member

2621 VPN P1 & P2 UP No traffic through tunnel nat?

Got it ... removed static entry and rebooted. Left route map in place ...

387
Views
0
Helpful
1
Replies
CreatePlease to create content