Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3002 client to 3005 central

Hi I have in place a 3002 client in a remote collocation facility and a 3005 central site concentrator in the main office. I am using it in NEM and can ping from the remote device to most boxes at the central site, i can also ping from one box at the central site to a box at the remote site but i cannot do this on all the other boxes at the central site nor can i ping from a VPN client connected to the central concentrator to the host on the other side of the remote site. I can in all cases ping the private IP of both concentrators. I put this tunnel in place to reach a single device on the remote site (3002). I want to use it as a lan to lan but i read the 3002 should be set up as a remote client. Any ideas?

New Member

Re: 3002 client to 3005 central

hi all - i figured this out - for anyone interested

i had to add static routes for the central concentrator internal network to the machine on the other side of the 3002 and all worked fine after this.

CreatePlease to create content