I have a 3005 Concentrator that I can not http to it anymore; I checked and I'm allowing http to be able to manage the concentrator through the outside interface, I was able to manage it before and suddenly I can not. I checked under managed protocols and http is enabled.
You can only login to the concentrator for http from allowed locations. If you are trying to connect to it from a dialup (DHCP ISP) you will need to add the ISP IP range! (BAD pratice.) this is why you would normaly manage this device from the internal network. You could assign a static IP to your VPN login - connect to the VPN as a user, then connect to it to manage it! - Might work. good luck. Mat
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...