Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

adding devices to ciscoworks

I recently installed a new version of ciscoworks on the windows server

All the subparts (e.g RME, DFM etc )have been installed properly ..Now I am having problems adding or discovering any device on the network although I am able to telnet to the main router from the same server somehow wont discover it on CW.

I went into server setup and changed SNMP V2 public string same as “public” (the one defined on the router ) and even entered the IP address of the router ( ….I need to get the devices added to it ASAP ….Can any one help ?


Re: adding devices to ciscoworks

Before adding devices to RME, you must add devices into Device and Credential Repository (Common Services > Device and Credentials > Device Management).

By default, the Automatically Manage Devices from Credential Repository option in the Device Management Settings window is enabled.

When you add devices to Device and Credential Repository and RME is down, the devices are added automatically when RME comes up again. The devices are added automatically, if the Automatically Manage Devices from Credential Repository option is enabled.

If this option is not enabled, you must manually add the devices.

New Member

Re: adding devices to ciscoworks

but I am not being able to enter devices on the DCR itself

CreatePlease login to create content