Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Adding live ASA to CSM

                   Hi Everyone,

I need to add  ASA  which is  in production to CSM 4.3  using Add  Network device method.

My concern is this ASA  is in multicontext  mode and if i add this to CSM  will it remove or change any config on ASA??

As i am doing this first time so i do not want to create any outage.

Regards

MAhesh

1 ACCEPTED SOLUTION

Accepted Solutions

Adding live ASA to CSM

It will not erase anything,

Just make sure you discover all contexts and policies at the same time; otherwise, you will have to discover policies for each context separately.

For Networking Posts check my blog at http://www.laguiadelnetworking.com/category/english/

Cheers,

Julio Carvajal Segura

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
1 REPLY

Adding live ASA to CSM

It will not erase anything,

Just make sure you discover all contexts and policies at the same time; otherwise, you will have to discover policies for each context separately.

For Networking Posts check my blog at http://www.laguiadelnetworking.com/category/english/

Cheers,

Julio Carvajal Segura

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
588
Views
0
Helpful
1
Replies
CreatePlease to create content