I'm trying to implement anyconnect for some users in our organization. Once clients connect to VPN via. anyconnect, they can't access anything, including their default gateway (via ping). I'm not sure what I've done wrong, but am hoping that it's a quick fix someone can point out to me. It's a little frustrating as I had this working in the lab, but can't see any obvious errors.
VPN Pool: 192.168.200.0/24
inside ASA interface 192.168.2.1
Grateful for any help received,
Greg
:
ASA Version 8.2(1)
!
hostname asaoutsidedmz
enable password 123 encrypted
passwd 123 encrypted
names
!
interface Ethernet0/0
description link to ISP router / WAN
nameif outside
security-level 0
ip address x.x.x.235 255.255.255.224
!
interface Ethernet0/1
description internal LAN interface
shutdown
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
!
interface Ethernet0/2
description DMZ interface
nameif dmz
security-level 50
ip address 192.168.2.1 255.255.255.0
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
!
boot system disk0:/asa821-k8.bin
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
dns domain-lookup outside
dns domain-lookup dmz
dns server-group DefaultDNS
domain-name cisco.com
access-list outside_access_in extended permit tcp any host x.x.x.232 eq www
access-list outside_access_in extended permit tcp any host x.x.x.234 eq ssh
pager lines 24
mtu outside 1500
mtu inside 1500
mtu dmz 1500
mtu management 1500
ip local pool SSLVPNDHCP 192.168.200.20-192.168.200.25 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 10 interface
global (dmz) 10 interface
nat (inside) 10 0.0.0.0 0.0.0.0
nat (dmz) 10 0.0.0.0 0.0.0.0
static (dmz,outside) x.x.x.232 192.168.2.18 netmask 255.255.255.255
static (dmz,outside) x.x.x.234 192.168.2.36 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.225 1
dynamic-access-policy-record DfltAccessPolicy
aaa-server RADIUS protocol radius
aaa-server TACACS+ protocol tacacs+
aaa authentication ssh console LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
no crypto isakmp nat-traversal
telnet timeout 5
console timeout 5
management-access inside
!
no threat-detection statistics tcp-intercept
webvpn
enable outside
svc image disk0:/anyconnect-win-2.3.2016-k9.pkg 1
svc enable
tunnel-group-list enable
group-policy SSLVPN internal
group-policy SSLVPN attributes
banner value SSL VPN Profile
vpn-simultaneous-logins 1
vpn-idle-timeout 30
vpn-tunnel-protocol l2tp-ipsec svc
webvpn
svc ask none default svc
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec l2tp-ipsec
username test11 password 123 encrypted privilege 0
username test11 attributes
service-type remote-access
tunnel-group SSLVPNTunnel type remote-access
tunnel-group SSLVPNTunnel general-attributes
address-pool SSLVPNDHCP
default-group-policy SSLVPN
tunnel-group SSLVPNTunnel webvpn-attributes
group-alias AgricorpVPN enable
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect pptp
!
service-policy global_policy global
prompt hostname context
: end
