Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Anyconnect slow with macbook pro wireless

I am having an issue with anyconnect verison 2.1.0148 on all wireless macbook connections. When I am plugged into a Lan line the throughput seems fine. Anytime I attempt to use the wireless on the macbook pro to connect to anyconnect the throughput is unacceptably slow. I can barely use RDC or apple remote desktop when connected wireless. I have tried changing my mtu size. I would assume that this was an issue with the ssl vpn client, but it is only slow for wireless anyconnect sessions.

1 REPLY
New Member

Re: Anyconnect slow with macbook pro wireless

Hi,

I had a similar problem on our wireless network and after long lasts we found it was the Mac. As you say, the speed was so slow, and we were using 802.11n!

I found that entering these commands helped on the Mac:

Changes

sudo sysctl -w net.inet.tcp.delayed_ack=0

sudo sysctl -w net.inet.tcp.rfc1323=0

sudo sysctl -w net.inet.tcp.recvspace=32768

sudo sysctl -w net.inet.tcp.sendspace=32768

sudo sysctl -w net.inet.tcp.win_scale_factor=1

sudo sysctl -w net.inet.tcp.sockthreshold=0

Defaults

sudo sysctl -w net.inet.tcp.delayed_ack=3

sudo sysctl -w net.inet.tcp.rfc1323=1

sudo sysctl -w net.inet.tcp.recvspace= 65536

sudo sysctl -w net.inet.tcp.sendspace= 65536

sudo sysctl -w net.inet.tcp.win_scale_factor=3

sudo sysctl -w net.inet.tcp.sockthreshold=64

Hope this helps

Mike

1741
Views
0
Helpful
1
Replies
CreatePlease login to create content