ASA 5505 transparent firewall and web server question 2
We have one WEB server behind a transparent ASA 5505 with the script below working perfectly. However, we need to add a second web server with similar requirement as this. Does any one know how this can be achieved with the script below. Please note that the script below works but we just need to know what to add for the new server to work as well.No NAT on existing server, and this new one does not need NAT as well. All the IP addresses are on the same network/subnet.
description --- Connected to the Internet ---
description --- Connected to LAN ---
description --- For Management only ---
ip address 10.1.10.1 255.255.255.0
object network WWW-SERVER-OBJ
description --- The WEB server ----
object-group service WWW-SERVER-SERVICES-TCP-OBJ tcp
description --- Services published on WEB server ----
port-object eq www
port-object eq https
access-list OUTSIDE-IN-ACL extended permit tcp any object WWW-SERVER-OBJ object-group WWW-SERVER-SERVICES-TCP-OBJ
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...