08-07-2013 10:02 AM - edited 02-21-2020 04:56 AM
Hi Everyone,
Since i added ASA to csm 4.3 our syslog server always see the message message
: Login denied from x.x.x.x/56432 to inside y.y.y.y/https.or user ""
where x is csm server ip
y is fw interface ip.
And after this message just after few secs i can see the CSM has successfully log to cisco ASA.
Need to know why i get this message with blank usernam
Regards
Mahesjh
Message was edited by: mahesh parmar
Solved! Go to Solution.
08-08-2013 10:02 PM
Perhaps one of your credentials (configuration manager, right click on firewall in question and choose Device properties, credentials and double check both login and enable credentials) is incorrect.
08-08-2013 10:02 PM
Perhaps one of your credentials (configuration manager, right click on firewall in question and choose Device properties, credentials and double check both login and enable credentials) is incorrect.
08-09-2013 08:14 AM
Hi MArvin,
I checked under --configuration manager, right click on firewall in question and choose Device properties, credentials
Under Primary Credentials username,password and enable password are the same.
Also below that under
HTTP Credentials
Use PRimary Credentials is checked.
Do i have to config Credentials under Polices window,platform,credentials also?
Regards
MAhesh
08-09-2013 08:23 AM
Hi MArvin,
Under Polices
Platform
Device admin
Credentials
username and password are blank also there it has enable password that is different from the one entered under --
configuration manager, right click on firewall in question and choose Device properties, credentials?
Regards
mahesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide