Hi,
I am new to ASA. I have got ASA 5510 and was trying to enable ASDM access through outside interface. but its not working for me... I have configured a public ip in outside interface and enabled ssh and asdm. SSH is working but asdm is not working. It is a test enviorment so i havent configured any ACL yet.
VPN-TEST# show version
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.2(1)
Compiled on Tue 05-May-09 22:45 by builders
System image file is "disk0:/asa821-k8.bin"
Config file at boot was "startup-config"
VPN-TEST up 4 hours 33 mins
Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: Ethernet0/0 : address is d0d0.fd1d.8758, irq 9
1: Ext: Ethernet0/1 : address is d0d0.fd1d.8759, irq 9
2: Ext: Ethernet0/2 : address is d0d0.fd1d.875a, irq 9
3: Ext: Ethernet0/3 : address is d0d0.fd1d.875b, irq 9
4: Ext: Management0/0 : address is d0d0.fd1d.8757, irq 11
5: Int: Not used : irq 11
6: Int: Not used : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 50
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
SSL VPN Peers : 2
Total VPN Peers : 250
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Linksys phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled
This platform has a Base license.
VPN-TEST# show run http
http server enable
http 0.0.0.0 0.0.0.0 outside
VPN-TEST# show run asdm
asdm image disk0:/asdm-621.bin
asdm history enable
Could anyone please help me to find out what i am missing?
Kind Regards,
Praveen