Assigning option 150 to dial-up VPN clients using IPC
I have several remote clients that VPN to different locations. These clients use the IPC application for voice services talking to CME enabled routers. Two locations use ASA5510's and one uses a 506E as the VPN gateway. There are no issues when the clients activate the VPN, but they need to manaually configure the TFTP server under the IPC application to access the proper CME. I would like the TFTP server to be pushed to each client when they VPN (like DHCP) but I cant find an option when I configure the IP Pools.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...