Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Auto Update Server to update ASA software

Hello,

I am using Cisco Security Manager 4.0.1 with the Auto Update installed.

I've configured my firewall with the following commands:

auto-update device-id hardware-serial
auto-update poll-period 1
auto-update server https://*@10.1.0.102/autoupdate source LAN1

(by the way, the username and password you specify in this last command is the one I use to log in to the CSM??)

I've enabled the debugging:

debug auto-update client

and I all get is the following output every 1 minute:

Auto-update client: Sent DeviceDetails to /autoupdate of server 10.1.0.102
Auto-update client: Failed to contact: https://10.1.0.102/autoupdate, reason: HTTP response: Found

And of course the ASA doesn't appear in the Auto Update device list on my CSM server...

What can I do?

thanks!!

1 REPLY
New Member

Re: Auto Update Server to update ASA software

hum, ok I've found why....

The default Auto Update Server URL in 4.0.1 is /autoupdate/AutoUpdateServlet but in the ASDM in which I've configured the AUS, by default it is only /autoupdate ...

1913
Views
0
Helpful
1
Replies