we are a government institution and we have many remote center that are connected by lan-to-lan connections through a VPN3030. The problem is that is very tedious because there are a lot of centers. We think that perhaps there is another way to add new lan-to-lan conections that can be integrated with a script than let masive addition of centers.
We have tried by snmp but mibs are only to monitoring. We have also tried by ssh interface but the menu for lan-to-lan doesn't exist.
What we are looking at here is that you configure your concentrator with a global pre-shared key and allow all vpn connections,(you can restrict it more in your filters) to connect to you vpn hub. So you will only need to configure your remote concentrator and wont have to add to your hub with every new connection. I do believe its not quite what your looking for, but im not sure if there is something with like VMS or LMS type feature allowing you to configure multiple concentrators with a "push". Thats something you should take up with your local Cisco SE if there isn't.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...