Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Bandwidth Limitation on ASA 5520 for Guest Internet

Hello Guys,

Good Morning,

I have 3 mb bandwidth from ISP, and i want to dedicate 1 Mb to guest wireless user rest for internal wireless user on ASA any suggestion...?

pls. suggest from below configuration...if it's ok.

access-list PoliceACLname permit ip 10.0.10.0 netmask 255.255.255.0 any

access-list PoliceACLname permit ip any any time-range test

class-map PoliceClassName
description Policy to limit general traffic usage
match access-list PoliceACLname

policy-map PolicePolicyName
description Policy to limit general traffic usage
class PoliceClassName
  police output 1000000 90000

service-policy PolicePolicyName interface outside

reg

Sanjeev

1 REPLY
Silver

Bandwidth Limitation on ASA 5520 for Guest Internet

Hi Sanjeev,

I did the same thing using ASDM. Steps are mentioned below:

Go to configuration > firewall > service policy rules

click ADD in the popup menu select the "interface" radio button and select the interface you wish to apply the rate limit to.

Step 1:give it a name, and click next

Step 2:select the "create new traffic class" radio button and give that a name also

Step 3:select the "any traffic" check box

click next

Step 4:select the QoS tab

Step 5:check the "enable policing" checkbox

fill out your rate limit options and apply the policy on the desired interfaces.

Regards,

Anim Saxena

Community Manager

1187
Views
0
Helpful
1
Replies
CreatePlease login to create content