Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Billing for above the CIR bandwidth

we are MPLS service provider, we need to deploy new services that when our customer bursting above the CIR we need to charge them for that bursting , we have CE to PE links like 10 M, SO so we are not using dial up or dsl links between the CE and PE , how we can do that billing and what the components required.

4 REPLIES

Re: Billing for above the CIR bandwidth

I would use Netflow. You can find more information in the link.

http://www.cisco.com/en/US/tech/tk812/tsd_technology_support_protocol_home.html

Hope that helps.

New Member

Re: Billing for above the CIR bandwidth

i want to know how it will be used with what software and may be to enable netflow it will make high utilization in the PE.

I Want to know how we gona use the netflow

Re: Billing for above the CIR bandwidth

The router reports flows to a netflow application that resides on a server. The software can then calculate the 95% and you can bill off of that number. Netflow has low overhead.

New Member

Re: Billing for above the CIR bandwidth

do you know what kind or name of this application, this application will be used by MPLS service provider for all the enterprise customers, i appreciate also if you can provide me how this things will work or to be configure.

Regards,

Ahmed

212
Views
0
Helpful
4
Replies