Branch to Branch VPN

[sarfarazkazi]

Hi,

We have 2 sites. Site A is hosting all the application servers and Site B has clients who want to connect to these application servers.

We have just purchased 2 ASA 5505 and would like to configure it. Site A has a subnet of 10.200.0.0/16 & site B have their own subnet 10.100.0.0/24. We also have /30 public subnets for both the sites.

Can someone please guide me with the configuration?

Regards

Sarfaraz

[JORGE RODRIGUEZ]

Sarfaraz,

Go to this link and look at mid page down at Site to Site VPN (L2L) with ASA, you will learn more by reading this examples and attempt to do it, post if your tunnels do not come up or have any issues to help you.

http://www.cisco.com/en/US/products/ps6120/prod_configuration_examples_list.html

for example here is one from above link out of many other examples.

LAN-to-LAN Tunnel Between ASA 5505 and ASA/PIX Configuration Example

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080950890.shtml

Also here is another link I usually recomend of Reading , I call it myself introduction to Ipsec 101. It will help in understanding IPsec when building L2L vpns

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a0080094203.shtml

Regards

Rate any helpful post if it helped