cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
366
Views
8
Helpful
5
Replies

Can't add ASA in CSM 3.1.1 when WEBVPN enabled

ckuriyar74
Level 1
Level 1

Hi Friends,

I have ASA5510 enabled with Web VPN access and when I try to add the ASA 5510 in Cisco security Manager 3.1.1 console it fails.

Can anyone help me to resolve this issue.

Thanks,

Chandru

5 Replies 5

Farrukh Haroon
VIP Alumni
VIP Alumni

Which version of the ASA?

I think they have some limitations there when it comes to SSL VPN, ASA 7.x with CSM 3.1.x and 8.x with 3.2.x only (Something like this).

Regards

Farrukh

The ASA version is 8.0(3) and CSM software 3.1.1

Iam able to add these ASA boxes in RME but unable to import from DCR in cisco security manager.

It fails to add the device and i suspect could be the device is unable to contact via https because webvpn is used this port.

any possible solutions to resolve this issue?

You can change ports for both ASDM and WEbVPN, have a look at:

http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807be2a1.shtml

Regards

Farrukh

However remember the earlier Caveat I mentioned:

http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/3.2.1/release/notes/csmrn321.html#wp131341

What's New in Security Manager 3.2.1

•Support for ASA 8.0 and 8.1 SSL VPN configurations. Support for SSL VPN on ASA 7.x is removed in Security Manager 3.2.1. The Security Manager 3.2.1 installer provides a warning if any ASA 7.x SSL VPN configurations are detected in the case of an upgrade.

Reagrds

Farrukh

I tried changing ports for both ASDM and WEbVPN.

Now I could able to import the ASA in CSM.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: