Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Can't set service policy

I am not able to have Service-Policy... " commands enabled in my Router that is working as a PE in the lab.

The router info is as follows:

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3640-JS-M), Version 12.2(21a), RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2004 by cisco Systems, Inc.

Compiled Fri 09-Jan-04 16:23 by kellmill

Image text-base: 0x60008930, data-base: 0x61458000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f

c1)

PE uptime is 5 hours, 12 minutes

System returned to ROM by power-on

System image file is "flash:slot0"

cisco 3640 (R4700) processor (revision 0x00) with 44032K/5120K bytes of memory.

Processor board ID 22105451

R4700 CPU at 100Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

1 Ethernet/IEEE 802.3 interface(s)

2 FastEthernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

1 Serial network interface(s)

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Can someone help with it.. thx.

1 REPLY

Re: Can't set service policy

Hi

Are you trying to bind the service policy under any of the interface or class map or in the control plane config ?

can you post what exactly you are trying to do and the error you are recieving while do so ..

regds

122
Views
0
Helpful
1
Replies
CreatePlease to create content