Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco IP Solution Center - Error when creating reports, Deleting SR jobs manually from cli, ISC auto start after boot

Hi,

1. I get the following error when running a report;

* Unable to create the report. The following error(s) occurred:
1 : NBI Reports Login Failed. Security credentials not valid

what could be the issue?

2. How do I create customized reports? Is creating XML files the only way?

3. How do I delete resource pools or jobs manually from OS cli?

4. Is it possible to auto start ISC when the server reboots?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Cisco IP Solution Center - Error when creating reports, Dele

Hello,

For 1. Maybe it is a licensing issue (NBI licenses), which version are you? I've heard reports are enabled by default on 6.0 but not sure.

For 2. Look at http://www.cisco.com/en/US/docs/net_mgmt/ip_solution_center/6.0/infrastructure/reference/guide/monit1.html#wp1229130 . I think xml is the only way even if you use directly the xmlapi.

For 3. I don't know if this is even possible. You can do it with nbi and xmlapi.

For 4. look at http://www.cisco.com/en/US/docs/net_mgmt/ip_solution_center/6.0/installation/guide/aptrbl.html#wp1032457 symptom 6.

Hope I helped.

3 REPLIES
New Member

Re: Cisco IP Solution Center - Error when creating reports, Dele

Hello,

For 1. Maybe it is a licensing issue (NBI licenses), which version are you? I've heard reports are enabled by default on 6.0 but not sure.

For 2. Look at http://www.cisco.com/en/US/docs/net_mgmt/ip_solution_center/6.0/infrastructure/reference/guide/monit1.html#wp1229130 . I think xml is the only way even if you use directly the xmlapi.

For 3. I don't know if this is even possible. You can do it with nbi and xmlapi.

For 4. look at http://www.cisco.com/en/US/docs/net_mgmt/ip_solution_center/6.0/installation/guide/aptrbl.html#wp1032457 symptom 6.

Hope I helped.

New Member

Re: Cisco IP Solution Center - Error when creating reports, Dele

For 1. Maybe it is a licensing issue (NBI licenses), which version are you? I've heard reports are enabled by default on 6.0 but not sure.

OK, My version is 5.2.1

For 2. Look at http://www.cisco.com/en/US/docs/net_mgmt/ip_solution_center/6.0/infrastructure/reference/guide/monit1.html#wp1229130 . I think xml is the only way even if you use directly the xmlapi.

So if I dont have the licenses it means even though I create the reports using XML, I still cant generate them?

For 3. I don't know if this is even possible. You can do it with nbi and xmlapi.

I was told that it is possible, i think by deleting job ids manually from the OS file system. I just dont know which files to delete.

For 4. look at http://www.cisco.com/en/US/docs/net_mgmt/ip_solution_center/6.0/installation/guide/aptrbl.html#wp1032457 symptom 6.


OK, will try this.

New Member

Re: Cisco IP Solution Center - Error when creating reports, Dele

For 2. I think tou need the NBI license to connect through xmlapi for all reports and custom commands.

For 3. There is a cli script "bin/runNbi" which runs .xml files from the cli against your server but again you have to devise the xml code to delete SRs and stuff.  There are examples in xmlapi documentation.

611
Views
0
Helpful
3
Replies