Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

boo
New Member

Cisco Network Assistant 5.5

I  downloaded Cisco Network Assistant 5.5, everytime when I try to run I get error message "Could not creat Java virtual Machine' any idea how to solve this?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Cisco Network Assistant 5.5

I  downloaded Cisco Network Assistant 5.5, everytime when I try to run
I get error message "Could not creat Java virtual Machine' any idea how
to solve this?

To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:

JVM_MAXIMUM_HEAP=1024m

Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m, and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.

Check out the below link for more information

http://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html

Hope to Help !!

Ganesh.H

Remember to rate the helpful post

2 REPLIES

Re: Cisco Network Assistant 5.5

I  downloaded Cisco Network Assistant 5.5, everytime when I try to run
I get error message "Could not creat Java virtual Machine' any idea how
to solve this?

To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:

JVM_MAXIMUM_HEAP=1024m

Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m, and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.

Check out the below link for more information

http://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html

Hope to Help !!

Ganesh.H

Remember to rate the helpful post

boo
New Member

Re: Cisco Network Assistant 5.5

Thanks Ganesh.

1698
Views
0
Helpful
2
Replies