Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Pix 501 passthru from Wan1 (Internet) to LAN (Office)

We're having issues with a PIX 501 not wanting to let traffic thru a tunnel.

I'm pretty sure it has to do with nat and nat traversal or no nat ... etc.

if my internal network is 192.168.X.0/24 and my WAN1 ip is 76.77.78.79, and that the WAN1 ip is coming from PPPoE.

i can get this far:

fixup protocol pptp 1723

access-list outside_access_in permit tcp any eq pptp any eq pptp

access-list outside_access_in permit gre any any

static (inside,outside) tcp 76.77.78.79 pptp 192.168.X.10 pptp netmask 255.255.255.255 0 0

access-group outside_access_in in interface outside

route inside 192.168.X.1 255.255.255.255 192.168.X.1 1

sysopt connection permit-ipsec

sysopt connection permit-pptp

Am i forgetting something ?

Thank you for any replies

Michel

1 REPLY
New Member

Re: Cisco Pix 501 passthru from Wan1 (Internet) to LAN (Office)

Finally figured out that the VPN pass-thru is fine.

I am now trying to figure out why i am unable to ping or access anything else but the Win2K3 server that hosts the vpn server.

Anyone has a clue ?

198
Views
0
Helpful
1
Replies