Classic but annoying problem with site to site VPN
Hi, when trying to connect two cisco routers through VPN, the only debug I have after activating it for crypto isakmp error, ipsec error and crypto engine is :
*Apr 22 14:31:31.672: ISAKMP:(0:0:N/A:0): construct_initial_message: Can not start Main mode
*Apr 22 14:32:01.788: ISAKMP:(0:0:N/A:0):No pre-shared key with 188.8.131.52!
*Apr 22 14:32:01.792: ISAKMP:(0:0:N/A:0): No Cert or pre-shared address key.
*Apr 22 14:32:01.792: ISAKMP:(0:0:N/A:0): construct_initial_message: Can not start Main mode
I'm driving nuts cause I had lots of problems on the past but I never seen this kind of error. I know is not, but by my point of VPN view everything is right in front of my eyes. Do you know this kind of problem ?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...