Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Concentrator DHCP to VPN Client/ Wrong Subnet

We have run into an issue with the new 4.x VPN client.

We have our concentrators setup with an address pool to hand off to all connecting clients. I have noticed that the 4.x client adds another network connection in W2k. Once the users connects it adds an address from the concentraotrs address pool to that connection

The problem here is that it is adding the wrong subnet for the address pool. Since the address are class A yet we really use a class C subnet the clients are getting a class A subnet.

I can't find anywhere were I can specify the subnet I want my address pool to use. Am i missing something here.

We are using 3005 concentrators with vpn3005-4.0.1.B-k9.bin.

Thanks!

1 REPLY
Bronze

Re: Concentrator DHCP to VPN Client/ Wrong Subnet

The process for adding/deleting/modifying the address pools is available at http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_guide_chapter09186a008015ce05.html.

135
Views
1
Helpful
1
Replies
CreatePlease to create content