Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

configuration of snmp community string.

can a router have more than 1 snmp community string both for RO & RW? if yes, then which command to configure to assign one as default. what will be the implications? the string are mentioned below.

snmp-server community nms RW

snmp-server community canms RO

snmp-server community private RW

snmp-server community public RO

  • Security Management
2 REPLIES
Blue

Re: configuration of snmp community string.

Unless you plan to use views for multiple strings, there isn't mucu use to have multiple strings. Also, there is no such thing as a default string.

New Member

Re: configuration of snmp community string.

thanks for the reply.

pls. clarify, is there any implication on router performance apart from security point for whole n/w. for view u mean that i should configure view for restriction i.e. "snmp-server community view 'string' v1default ro" command.

220
Views
0
Helpful
2
Replies
This widget could not be displayed.