Configure ACS 5.3 to Assign a Group Policy at Login using RADIUS
To push Radius attribute 25 as part of authorization for VPN users, following stpes have to be followed:
Browse to Policy Elements> Authorization Policy> Network Access> Authorization Profile and click on create;
Create a new authorization profile as shown in the snapshot below. Name of the new authorization rule is Radius-attribute25:
Click on RADIUS attribute tab for the above profile created and add Class attribute 25 as shown in the below snapshot. ( In the snapshot,VPNgroup is the name of the group that has to be pushed as class attribute)
Click on Add and Save the config
After you create Authorization Profile, browse to required Authorization policy under Access Policies and assign the Authorization profile as a result to respective rule of authorization policy.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...