Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Conflicting Device Types

How do I check the following ID's to select the correct type for resolution?

If I check the box and click update, it resolves the issue. I just want know if the RME is recognizing the correct info.

172.16.x.x

SysObjectID in DCR 1.3.6.1.4.1.9.1.201

SysObjectID found by RME 1.3.6.1.4.1.9.1.620

Thanks in advance.

  • Security Management
4 REPLIES
Cisco Employee

Re: Conflicting Device Types

Hi.

The best way to determine what a specific sysObjectID refers to is to bounce it against the CISCO-PRODUCTS-MIB.my which you can see here:

ftp://ftp-sj.cisco.com/pub/mibs/v2/CISCO-PRODUCTS-MIB.my

so for 1.3.6.1.4.1.9.1.201 (which is ciscoProducts.201) we see:

cisco1720 OBJECT IDENTIFIER ::= {ciscoProducts 201 }

and for 1.3.6.1.4.1.9.1.620 (which is ciscoProducts.620) we see:

cisco1841 OBJECT IDENTIFIER ::= { ciscoProducts 620 } -- 1700 Next Generation data only router with 2 slots

HTH,

-Joe

Cisco Employee

Re: Conflicting Device Types

Hi.

The best way to determine what a specific sysObjectID refers to is to bounce it against the CISCO-PRODUCTS-MIB.my which you can see here:

ftp://ftp-sj.cisco.com/pub/mibs/v2/CISCO-PRODUCTS-MIB.my

so for 1.3.6.1.4.1.9.1.201 (which is ciscoProducts.201) we see:

cisco1720 OBJECT IDENTIFIER ::= {ciscoProducts 201 }

and for 1.3.6.1.4.1.9.1.620 (which is ciscoProducts.620) we see:

cisco1841 OBJECT IDENTIFIER ::= { ciscoProducts 620 } -- 1700 Next Generation data only router with 2 slots

HTH,

-Joe

Cisco Employee

Re: Conflicting Device Types

Hi.

The best way to determine what a specific sysObjectID refers to is to bounce it against the CISCO-PRODUCTS-MIB.my which you can see here:

ftp://ftp-sj.cisco.com/pub/mibs/v2/CISCO-PRODUCTS-MIB.my

so for 1.3.6.1.4.1.9.1.201 (which is ciscoProducts.201) we see:

cisco1720 OBJECT IDENTIFIER ::= {ciscoProducts 201 }

and for 1.3.6.1.4.1.9.1.620 (which is ciscoProducts.620) we see:

cisco1841 OBJECT IDENTIFIER ::= { ciscoProducts 620 } -- 1700 Next Generation data only router with 2 slots

HTH,

-Joe

Cisco Employee

Re: Conflicting Device Types

wow...sorry for the duplicate posts... :-)

110
Views
10
Helpful
4
Replies
This widget could not be displayed.