cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
422
Views
10
Helpful
4
Replies

Conflicting Device Types

wrightbill
Level 1
Level 1

How do I check the following ID's to select the correct type for resolution?

If I check the box and click update, it resolves the issue. I just want know if the RME is recognizing the correct info.

172.16.x.x

SysObjectID in DCR 1.3.6.1.4.1.9.1.201

SysObjectID found by RME 1.3.6.1.4.1.9.1.620

Thanks in advance.

4 Replies 4

jreekers
Level 4
Level 4

Hi.

The best way to determine what a specific sysObjectID refers to is to bounce it against the CISCO-PRODUCTS-MIB.my which you can see here:

ftp://ftp-sj.cisco.com/pub/mibs/v2/CISCO-PRODUCTS-MIB.my

so for 1.3.6.1.4.1.9.1.201 (which is ciscoProducts.201) we see:

cisco1720 OBJECT IDENTIFIER ::= {ciscoProducts 201 }

and for 1.3.6.1.4.1.9.1.620 (which is ciscoProducts.620) we see:

cisco1841 OBJECT IDENTIFIER ::= { ciscoProducts 620 } -- 1700 Next Generation data only router with 2 slots

HTH,

-Joe

jreekers
Level 4
Level 4

Hi.

The best way to determine what a specific sysObjectID refers to is to bounce it against the CISCO-PRODUCTS-MIB.my which you can see here:

ftp://ftp-sj.cisco.com/pub/mibs/v2/CISCO-PRODUCTS-MIB.my

so for 1.3.6.1.4.1.9.1.201 (which is ciscoProducts.201) we see:

cisco1720 OBJECT IDENTIFIER ::= {ciscoProducts 201 }

and for 1.3.6.1.4.1.9.1.620 (which is ciscoProducts.620) we see:

cisco1841 OBJECT IDENTIFIER ::= { ciscoProducts 620 } -- 1700 Next Generation data only router with 2 slots

HTH,

-Joe

jreekers
Level 4
Level 4

Hi.

The best way to determine what a specific sysObjectID refers to is to bounce it against the CISCO-PRODUCTS-MIB.my which you can see here:

ftp://ftp-sj.cisco.com/pub/mibs/v2/CISCO-PRODUCTS-MIB.my

so for 1.3.6.1.4.1.9.1.201 (which is ciscoProducts.201) we see:

cisco1720 OBJECT IDENTIFIER ::= {ciscoProducts 201 }

and for 1.3.6.1.4.1.9.1.620 (which is ciscoProducts.620) we see:

cisco1841 OBJECT IDENTIFIER ::= { ciscoProducts 620 } -- 1700 Next Generation data only router with 2 slots

HTH,

-Joe

wow...sorry for the duplicate posts... :-)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: