Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cs 2611vpn router connected to 2 different Isp

I want to have 2 wan links connected to a Cs 2611 (wic-2t) and run gre+ipsec tunnels (half remote tunnels to Isp1, the other half to isp2).

I also want Eigrp for automatic convergence (eg primary tunnel to isp A, secondary to ispB).

Any similar working experiences?

enrico

2 REPLIES
Silver

Re: Cs 2611vpn router connected to 2 different Isp

You could use two different crypto map on the two serial links, and use the same acl. The tunnel comes up, and normally the traffic goes the way of the first tunnel to come up. Only when the other link goes down then you could use the other link, so in effect you really are not load balancing.

New Member

Re: Cs 2611vpn router connected to 2 different Isp

I don't want load balancing but a backup tunnel that comes up when the primary tunnel fails;

182
Views
0
Helpful
2
Replies
CreatePlease login to create content