I have integrated my new CSM with full ACS integration. I have devices in ACS database which needs to be ported under CSM. I noticed that when I add a device under CSM there is an option of 'Domain Name'.
If I select domain name I get the following error:
If I delete and existing device on ACS and then recreat it in ACS using device_name.xyz.com then CSM works fine and adds the device with domain name. But if domain name is not on ACS devices' names CSM does not work.
Could you please tell me if there is a way to resolve this issue without deleting and adding the devices in ACS with domain name?
The other option I have is not to use "domain name' on CSM, but that is not allowed in my case.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...