Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

CSM shows mistakenly hitcount = 0

Hi all,

mabe someone could answer the following incorrect information

my clinet running a CSM 4.2 on a win2008 with 8Gig RAM (as per cisco recomendation)

The problem is that the CSM in the analysis of access lists indicating a hitcount zero for all access lists, but on the CMD line values ​​exist.

I tried to Google it but without any luck.

any help is appriciated.

thanks in advance

Lance

1 REPLY
Community Member

CSM shows mistakenly hitcount = 0

I'm seeing the same problem as you with CSM 4.4sp2

On the CLI we see the hitcounts but in CSM we get hitcount = 0 on all entries except the last entry which is a deny ip any any.

It doesn't matter if the firewall is a multi-context firewall or a standalone. Problem seem to be both with ASA's running 8.x and 9.x software.

-Michel

1691
Views
0
Helpful
1
Replies
CreatePlease to create content