04-05-2003 09:05 AM - edited 02-20-2020 10:40 PM
hi,
i install ciscoworks2000lan and rwan on W2k Professional,it has works properly for a long time.but recently,when i login ciscoworks2000 from client and run topology service,it notice me:cannot connect aniserver,maybe aniserver shutdown or not running.
so i check the process status,and find:aniserver running but busy flag set.
i dont know why.so i need your help...
i re-installed two time with the same problem.
if i use http://<ip-address>:1741 i can´t login but i can login with this url http://<ip-address>:1741 (just login)
thanks.
04-06-2003 08:03 PM
Is VHM also installed with Campus Manager?. Try stopping and re-starting crmdmgtd and then lauch CM.
04-07-2003 06:07 AM
I don´t have VHM!
04-07-2003 10:06 AM
Are you connecting via a Proxy?
04-07-2003 11:12 AM
No, i trying from the console!,
tks
04-10-2003 10:59 PM
There are two option that you can do...
first: stop and start the CiscoWork daemon using "net stop crmdmgtd" and "net start crmdmgtd"
Second: try re-installing again the ciscoworks but make sure you backup all the seed files.
I encountered this issue but most of the time using the first option, i'm able to connect to the ANI server my last option is to re-install it
04-23-2003 02:22 PM
Kamusta! Just saw your post here and wanted to say Hi. Is Intel Phil A pure Cisco shop? Anyway Nice to see a fellow filipino here.
04-11-2003 03:33 AM
hi,
it is possible that your ANI-Server Database is corrupted. There is a good description on Cisco Website to correct this problem.
good luck
05-15-2003 05:44 AM
Hi there,
I don't know what version of CW you are running but i had the same problem with LMS version 1 CDOne-Edition2.. running on NT4.0 SP6a + hotfixes...
I found out that MS hofix Q328310 kills my ANIServer... so i uninstalled it and now ANI is working fine again...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: