Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CWLMS 3.1 : CiscoView of Cisco 7606-S Router

Hi Friend,

I am facing some issue with CiscoView of 7606-S router.

Please find the attachment for more details.

In figure, The RED Marked LAN port appears GREEN when viewed through CiscoWorks but physically on Cisco 7606-S router, no such port exists at all.

Also besides this, we have 3 fiber ports and 2 RJ-45 port on Cisco router visible through CiscoView, but physically on Cisco router 2 Fiber and 2 RJ-45 port are present.

first fiber port is up and connected whereas when seen through CiscoWorks, it shows 3rd fiber port as green.

1 REPLY
Silver

Re: CWLMS 3.1 : CiscoView of Cisco 7606-S Router

you can not display your 7600 in ciscoview, the most probably reason is that a device package is needed to do this. do the following:

1. Download the device package from the link (Cat6000IOS.cv50.v29-1.zip, Cat6000IOS.cv50.v29-1.readme)

http://www.cisco.com/cgi-bin/apps/vwplan/cvresult.cgi?product_class=Routers&product=Internet+Router+7600+IOS&application=All+Versions

2. Go to Common Services > Software Center > Device Update, then select CiscoView > click on 'Check for updates' > select 'Enter Server Path' and enter the path where you downloaded the files > continue the instructions to

install it.

This will probably need to restart ciscoworks to apply the changes.

220
Views
0
Helpful
1
Replies