Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Date and Time Incorrect

We have a VPN 3005 Concentrator, ver. 4.7.1. The date and time in the Filterable Event Log is one hour ahead (Monitoring, Filterable Event Log). However, the date and time in the Live Event Log is correct. The date and time is setup correctly under Configuration, System, General, Time and Date. This matches with date and time in the Live Event Log. Where else should I look to see why the date and time in the Filterable Event Log is incorrect?

Thanks.

Jill

4 REPLIES
Bronze

Re: Date and Time Incorrect

Hi Jill,

You need to un-check the Enable DST Support from Config->System->General- Time and Date.

During DST (Daylight-Saving time), clocks are set one hour ahead of standard time.

Please rate if it does!

Abd Alqader

New Member

Re: Date and Time Incorrect

Abd,

If I uncheck the Enable DST Support (Config, System, General), will the clocks automatically get adjusted when the Daylight Saving Time occurs? For example, when the Daylight Saving Time occurs in October, the VPN Concentrator would fall back one hour. Thanks.

Bronze

Re: Date and Time Incorrect

Really, i don't know.

But according to your question for the 60 minutes difference, unchecking this feature will adjust it to your time.

Sorry for not answering your question

Abd Alqader

New Member

Re: Date and Time Incorrect

Thanks Abd.

205
Views
4
Helpful
4
Replies
CreatePlease to create content