I am trying to configure an acl to deny rdp traffic on one of our server which has a static nat from one of our public IP. How can I configure it without dropping all other traffic? Will these configuration do it?
access-list (acl name) deny tcp any host (Public IP of server) eq 3389
access-list (acl name) permit ip any any
access-group (acl name) in interface outside
Attached also is the sanitized configuration of the PIX firewall so anyone can see what is configured in it.
Thanks in advance for all your help and replies :)
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...