Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DHCP Relay

I have configured a VPN (site-to-site, PIX to Juniper) and I have to use the DHCP-Server in location A with the clients in location B. I configured

dhcprelay server 10.10.10.10 outside

dhcprelay enable inside

dhcprelay timeout 30

Now if I do ipconfig /renew at the client the vpn comes up but no more.

In debug mode I see

DHCPRA msg recieved, fip=0.0.0.0, fport=68

What?s going wrong?

With static IP I can ping the DHCP-Server.

regards

Helmut

2 REPLIES

Re: DHCP Relay

Hello Helmut,

is the DHCP traffic also part of your VPN description, i.e. does the DHCP discover/request from the PIX arrive at the DHCP server and the DHCP offer/ack is sent across the VPN back to the PIX?

Can you ping the DHCP server from the PIX?

Might be a connectivity issue.

Regards, Martin

New Member

Re: DHCP Relay

Hello Martin,

the DHCP request doesn?t arrive the server and the vpn-peer at the other side.

If the tunnel is down and I ping from a client with static ip-address the tunnel comes up and ping is ok, also from PIX.

Regards, Helmut

122
Views
0
Helpful
2
Replies