When talking about setting up a DMZ, a PIX model with atleast three interfces is required. On a PIX 501, only two interfaces are available, an outside interface (ethernet) and an inside interface (availabe as a 4 port switch). For stting up a DMZ, you will need an additional interface and that would mean getting a higher model of the PIX. The idea of using a router on the inside interface and then configuring restrictive policies on it might work but will make the setup messy and you are unlikely to find a satisfactory level of support for it for the simple reason that not many neworks are deployed that way.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...