Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Dynamic VPN - client to IOS - with shaping

I have 3640s and want to encrypt wireless clients to the router, since not all win2k laptops do leap. Peap tested is flaky. I have VPN client to IOS using dynamic cryptomap with back-end RADIUS xauth working, only, one 2.5meg FTP stream brings the proc utilization to 80% with AES or 1DES. I came up with the idea of using class-based shaping to throttel the encrypted traffic to under 2 meg on the ingress and egress, which brings the utilization down to 50%. I hammering the shapping queues and see no drops, what are the implications on this VPN

This is a temp fix until non-cisco wireless clients start supporting PEAP, and will only have 2 or 3 clients on at a time.

155
Views
0
Helpful
0
Replies
CreatePlease to create content