Easy VPN Remote (EzVPN) tunnel disconnect

[don.wahl]

We have Easy VPN setup using PIX 501s for the remotes and ASA-5540s in our data center and everything works as advertised. One 'feature' I can't find is a way to disconnect the VPN tunnel other than from the PIX 501 command line. Is there a URL similar to the /vpnclient/connstatus.html that would allow a disconnect of the tunnel from an inside connected PC?

[smalkeric]

To disconnect or reset a particular tunnel, you should use the "clear crypto ipsec client ezvpn" command, or you can use SDM.

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftezvpnr.html#wp1046284