Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FlexConfig - How to execute "TFTP" command to save running config via Flex

Hi

I want to save the running config from all our firewall via flexconfig.

The problem is the carriage return after the command "copy running tftp://ip-address"

I have to confirm the tftp server and the file manually

I have no idea - how to do this via flexconfig -

I found a flexconfig script to load a image to the asa called : ASA_copy_image

Any Idea how to modify this script ?

THX for help

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: FlexConfig - How to execute "TFTP" command to save running c

You can try Flexconfig with

copy /noconfirm running tftp://ip-address

I hope it helps.

PK

3 REPLIES
Cisco Employee

Re: FlexConfig - How to execute "TFTP" command to save running c

You can try Flexconfig with

copy /noconfirm running tftp://ip-address

I hope it helps.

PK

New Member

Re: FlexConfig - How to execute "TFTP" command to save running c

THX for help

it working . I used the copy help on the Firewall command line and did not find any hint for /noconfirm

But now it works well

Cisco Employee

Re: FlexConfig - How to execute "TFTP" command to save running c

I am glad it worked.

Take care,

PK

439
Views
0
Helpful
3
Replies