Forcing remote VPN to use specific ASA interface ?
We have an ASA-5520 that is use for our remote VPN users and I've set it up with multiple DMZ interfaces (vlan). There is a Microsoft-ISA server between the ASA and our internal network and this ISA has interfaces that matches those on my ASA server.
My goal is that I want to force a specific vpn group or address-pool to go through a specific interface on the ASA so I only have to manage access-list on the ISA server, for each DMZ.
The reason why I'm doing this is that there will be also some workstations right on the lan (at our office) in these same DMZ, so I only have to create rules on the ISA wether users are connecting from their PC at the office or through their remote VPN connection.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...