Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Getting Mircosoft DHCP to work with 3015

I'm having trouble setting up a WIN2K DHCP server to hand out addresses to my VPN clients (client v.3.5.3, 3015 concentrator v3.6.3). The Private subnet of the Concentrators is on the same network as the DHCP server. The DHCP addresses only exist for the clients, so there isn't a physical network that uses the same subnets. This setup is currently working by using the local pools on the Concentrators, but when I try to point the Concentrators to the active DHCP scopes, it gives me an error saying that it cannot retrieve an address from DHCP. On the Concentrators, I've added the server IP into the DHCP server section as well as enabling "DHCP Parameters". I've setup superscopes on DHCP which combine 2 class C's to hand out to the "router" (which is the Concentrator's private interface IP), but I don't know why it's failing!!!

Please help!!!

1 REPLY
Cisco Employee

Re: Getting Mircosoft DHCP to work with 3015

Already answered under the VPN - Security section, check there for results if interested.

233
Views
0
Helpful
1
Replies
CreatePlease to create content