Hairpin from one VPN to another using VPN3015

[mikeb]

I have a 3015 with two remotely connected PIX 501 VPNs. I am having difficutly getting the configuration to allow me to send traffic from one remote network to the other via the VPNs.

Is this actually possible? If so, what is the method for configuration?

Thanks in advance.

MB

[JOSH GANT]

Make sure your ACL's in the 501's describe local subnet traffic going to the headend subnet and the other edge site subnets. Make sure that the 501 doesn't NAT that traffic.

On the Concentrator your lists describing the local and remote networks must contain all edge subnets.