I am hoping someone can help w/configuring a ASA5510. I am wanting to limit FTP traffic. We have an MPLS connetion consisting of 6 T1's. I would like to limit FTP traffic from the internet to 1 of theses T1's. I don't care about people on the inside regarding FTP downloads. I just don't want the people on the outside able to use more than one sixth of my bandwidth when they download something from us.
I have looked at QOS etc.. and don't understand it as well as I should. I don't even know if that's the way to go. It seems I should be able to just give egress FTP traffic a certain amount of bandwidth. Could someone help me w/the correct commands for this? Thanks....
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...