Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

help to site to site vpn wizard

HI.

I need configure a vpn site to site between 2 cisco routers.

My lan is:

Fastehernet0 (wan) : 213.27.220.214

vlan1: 10.0.0.0/24 router:10.0.0.251

etc...

In wizard(img1.jpg) I don't know where have every type:

for example:

1. Select the interface for this VPN connection: here vlan1 or fastehernet0???

2. Source : vlan1 or fastethernet 0???

3. destination: 10.0.0.0 /255.255.255.0 ???

Help please

3 REPLIES

Re: help to site to site vpn wizard

Oscar,

I would configure:-

1 = choose FE 0/0

2 = choose VLAN 1

3 = the remote end LAN IP Subnet

HTH

New Member

Re: help to site to site vpn wizard

3= remote lan is 192.168.101.0/24 and router is 192.168.101.254

would configure:

192.168.101.254 255.255.255.255

or

192.168.101.0 255.255.255.0

I have proved the two configurations and tunnes is down

Re: help to site to site vpn wizard

I would configure 192.168.101.0 255.255.255.0 - this means that any traffic "going to" 192.168.101.0/24 "should" be encrypted.

278
Views
0
Helpful
3
Replies