How do I allow servers behind an ASA 5525-X, access to the internet?
I'm having trouble getting my inside servers to connect to the internet, for things like updates. Is there a certain rule I need to have to allow this on my ASA 5525-X? The servers can't see anything outside of the inside network. Also, all my servers are NAT'd.
How do I allow servers behind an ASA 5525-X, access to the inter
Your statement is too general. The root cause can be almost anything e.g. configuration, bug, physcial layer etc. Can you paste your show running-config, show version and show interface ip brief here, so that everyone here could assist you.
Ramraj Sivagnanam Sivajanam
Technical Specialist/Service Delivery Manager – Managed Service Department
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...