Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to configure "view-only" priviliges on Catalyst Device Manager

Hi,

a customer want a user which has view-only rights on his catalyst switches. I created a user whit privilige level 7.

If you log into the CLI everything is fine. But by trying to log into the web page the system wants a level 15 user.

Is their any possibility to grant the level 7 user "view-only" rights on the Catalyst Device Manager?

Thanks.

Thanks.

4 REPLIES

Re: How to configure "view-only" priviliges on Catalyst Device M

Hi,

a customer want a user which has view-only rights on his catalyst switches. I created a user whit privilige level 7.

If you log into the CLI everything is fine. But by trying to log into the web page the system wants a level 15 user.

Is their any possibility to grant the level 7 user "view-only" rights on the Catalyst Device Manager?

Thanks.

Thanks.

Hi,

Check out the below link for SDM for read only user configuration

http://conft.com/en/US/docs/routers/access/cisco_router_and_security_device_manager/application/notes/SDMcli.pdf

Hope to Help !!

Ganesh.H

Remember to rate the helpful post

New Member

Re: How to configure "view-only" priviliges on Catalyst Device M

Unfortunantly I don't have a router. The customer has catalyst switches and they only have the catalyst device manager not the SDM.

Re: How to configure "view-only" priviliges on Catalyst Device M

have you tried parser view ?

New Member

Re: How to configure "view-only" priviliges on Catalyst Device M

Thanks for your hint. But the problem is that I don't now which comannd I have to use, to get the web-view working.

289
Views
0
Helpful
4
Replies