Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to Enable logging of the ASA 5525?

I need help to enable logging of the ASA 5525 for all new rules created today from the firewall module, rules changed, deleted desabilidas and disabled rules.

Not found in the historic level of the ID on new firewall rules.


0 or emergencies—System is unusable.
1 or alerts—Immediate action needed.
2 or critical—Critical conditions.
3 or errors—Error conditions.
4 or warnings—Warning conditions.
5 or notifications—Normal but significant conditions.
6 or informational—Informational messages.
7 or debugging—Debugging messages.

Thank you.

 

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

You cannot log only those

You cannot log only those changes but you can log *all* changes.

The messages 111008 and 111010 are the ones to look for (as described in this post).

1 REPLY
Hall of Fame Super Silver

You cannot log only those

You cannot log only those changes but you can log *all* changes.

The messages 111008 and 111010 are the ones to look for (as described in this post).

86
Views
0
Helpful
1
Replies
CreatePlease to create content