02-07-2012 09:23 AM - edited 02-21-2020 04:33 AM
Hi All,
When I telnet to a cisco PIX/ASA, I would like to get into privilege 15 automatically after a successful login by typing admin/cisco. I configured the following commands on the PIX but it doesn't work as expected. I still need to type in the enable password.
username admin password cisco privilege 15
aaa authentication telnet console LOCAL
aaa authentication enable console LOCAL
aaa authorization command LOCAL
How can I bypass the enable password? It's very easy to accomplish this goal on a cisco IOS device.
Thanks in advance.
Robert
02-07-2012 08:22 PM
I don't believe one can do this on an ASA or Pix. A security appliance is just more secure that way.
05-03-2012 09:25 AM
Check this thread.
https://supportforums.cisco.com/thread/2040973
Also,
http://www.cisco.com/en/US/docs/security/asa/asa81/config/guide/mgaccess.html
Per the above document you still need an additional statement:
privilege [show | clear | cmd] level level [mode {enable | cmd}] command command
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: