Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to get into privilege 15 automatically after successful login

Hi All,

When I telnet to a cisco PIX/ASA, I would like to get into privilege 15 automatically after a successful login by typing admin/cisco. I configured the following commands on the PIX but it doesn't work as expected. I still need to type in the enable password.

username admin password cisco privilege 15

aaa authentication telnet console LOCAL

aaa authentication enable console LOCAL

aaa authorization command LOCAL

How can I bypass the enable password? It's very easy to accomplish this goal on a cisco IOS device.

Thanks in advance.

Robert

2 REPLIES
Hall of Fame Super Silver

how to get into privilege 15 automatically after successful logi

I don't believe one can do this on an ASA or Pix. A security appliance is just more secure that way.

New Member

how to get into privilege 15 automatically after successful logi

Check this thread.

https://supportforums.cisco.com/thread/2040973

Also,

http://www.cisco.com/en/US/docs/security/asa/asa81/config/guide/mgaccess.html

Per the above document you still need an additional statement:

privilege [show | clear | cmd] level level [mode {enable | cmd}] command command
1843
Views
0
Helpful
2
Replies
CreatePlease login to create content